Converted Dresser Drawer Wall Storage ─ BuzzFeed Nifty

Here is what you'll need!

Converted Dresser Drawer Wall Storage

Materials
2 sheets of plywood
2 drawers
Screws
Saw
Pencil
Power drill
Drill bits
Ruler tape
Driving bits
4 hinges
Chain
2 Eyebolt
2 Hook
Sandpaper
Wood stain
Paint brush

Instructions

Get measurement of the inside of a drawer to determine the size of the shelf divider.
Use the saw to resize plywood for the shelf divider. Save half of the plywood for the base of the table.
Place shelf divider into drawer.
Mark on the outside of the drawer of where you will be attaching the shelf divider.
Drill holes into the drawer and the shelf divider.
Connect the shelf divider to the drawer with screws.
Place the two drawers side-by-side.
Connect drawers with screws. Be sure to drill holes first.
Resize leftover plywood to fit the base of the table.
Attach base with screws. Be sure to drill holes first.
Resize 2nd sheet of plywood for the table (lid) of the shelf.
Place table/lid over the drawers.
Attach hinges to the table/lid and the drawer with screws.
Attach chains to the edge of the drawers and edge of the table/lid with screws.
Screw in eye bolt to the side of the table lid.
Screw in hook to the drawers.
Repeat steps 15-16 on other side.
Sand down shelf.
Apply wood stain.
Let dry.
Apply top coat.



Check us out on Facebook! - facebook.com/buzzfeednifty

Credits: https://www.buzzfeed.com/bfmp/videos/...


MUSIC
Full House
Licensed via Warner Chappell Production Music Inc.